 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Order this document by MC12018/D 520 MHz Dual Modulus Prescaler The MC12018 is a dual modulus prescaler which divides by 128 and 129. An internal regulator is provided to allow this device to be used over a wide range of power supply voltages. The devices may be operated by applying a supply voltage of 5.0 Vdc 10% at Pin 7, or by applying an unregulated voltage source from 5.5 Vdc to 9.5 Vdc to Pin 8. MC12018 MECL PLL COMPONENTS /128/129 DUAL MODULUS PRESCALER SEMICONDUCTOR TECHNICAL DATA * * * * * 520 MHz Toggle Frequency Low-Power 8.0 mA Typical Control Input Is Compatible With Standard CMOS and TTL Supply Voltage 4.5 V to 9.5 V On-Chip 10 k Resistor from Positive Edge to Ground 8 1 D SUFFIX PLASTIC PACKAGE CASE 751 (SO-8) 8 SIMPLIFIED BLOCK DIAGRAM Control Input 1 Signal Input Signal Gnd 0.001 F 5 6 0.001 F Vreg 7 0.1 F VCC 8 0.1 F TO Vreg 1 P SUFFIX PLASTIC PACKAGE CASE 626 3 POS Edge 10 k NEG 2 Edge 4 /N / N+1 PIN CONNECTIONS Gnd Voltage Regulator IN NE PE Gnd 1 2 3 4 8 7 6 5 VCC Vreg SGnd SIN (Top View) ORDERING INFORMATION 1. Vreg at Pin 7 is not guaranteed to be between 4.5 and 5.5 V when VCC is being applied to Pin 8 2. Pin 7 is not to be used as a source of regulated output voltage 3. 10 k pulldown recommended with negative edge output (Pin 2) Device MC12018D MC12018P Operating Temperature Range TA = - 40 to +85C Package SO-8 Plastic (c) Motorola, Inc. 1997 Rev 2 MC12018 MAXIMUM RATINGS Rating Regulated Voltage, Pin 7 Power Supply Voltage, Pin 8 Operating Temperature Range Storage Temperature Range NOTE; ESD data available upon request. Symbol Vreg VCC TA Tstg Value 8.0 10 -40 to +85 -65 to +175 Unit Vdc Vdc C C ELECTRICAL CHARACTERISTICS (VCC = 5.5 to 9.5 V; Vreg = 4.5 to 5.5 V; TA = -40 to 85C), unless otherwise noted.) Characteristic Toggle Frequency (Sine Wave Input) Supply Current Control Input HIGH (/128) Control Input LOW (/129) Differntial Output Voltage (Isource = -200A) Input Voltage Sensitivity 75MHz 125-520MHz PLL Response Time (Notes 1 and 2) Symbol fmax fmin ICC VIH VIL Vout Vin 400 200 tPLL - - - - 800 800 tout-50 ns Min 520 - - 2.0 - 0.8 Typ - - 8.0 - - 1.0 Max - 75 10.7 - 0.8 - Unit MHz mA V V V mVPP NOTES: 1. tPLL = the period of time the PLL has from the prescaler rising output tranistion (50%) to the modulus control input edge transition (50%) to ensure proper modulus selection. 2. tout = period of output waveform. 2 MOTOROLA RF/IF DEVICE DATA MC12018 OUTLINE DIMENSIONS P SUFFIX PLASTIC PACKAGE CASE 626-05 ISSUE K NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. DIM A B C D F G H J K L M N MILLIMETERS MIN MAX 9.40 10.16 6.60 6.10 4.45 3.94 0.51 0.38 1.78 1.02 2.54 BSC 1.27 0.76 0.30 0.20 3.43 2.92 7.62 BSC -- 10 1.01 0.76 INCHES MIN MAX 0.370 0.400 0.240 0.260 0.155 0.175 0.015 0.020 0.040 0.070 0.100 BSC 0.030 0.050 0.008 0.012 0.115 0.135 0.300 BSC -- 10 0.030 0.040 8 5 -B1 4 F NOTE 2 -AL C -TSEATING PLANE J N D H G 0.13 (0.005) M K T A M M B M D SUFFIX PLASTIC PACKAGE CASE 751-06 (SO-8) ISSUE T A 8 D 5 C E 1 4 H 0.25 M B M h B C e A SEATING PLANE X 45 _ NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ q L 0.10 A1 B 0.25 M CB S A S q MOTOROLA RF/IF DEVICE DATA 3 MC12018 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shagawa-ku, Tokyo, Japan. 03-5487-8488 4 MC12018/D MOTOROLA RF/IF DEVICE DATA |
Price & Availability of MC12018D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |